GMAX Version 1 8/2003
*****************************************
Built by Greg Pepper
Painted by Dave McQueen
Minor assistance from Tom Gibson
Technical and testing help from Dave McQueen
Virtual Cockpit modiffied by Jorge Buiatti (buiattijo1@yahoo.es)
Flight dynamics by FSAviator (true FS2002 flight model with dynamics derived from actual flight manual information), correct within 3% of the real flying characteristics - see Reference file (F10). This FDE is not designed for AI use - it will not work. Download AI propliners at http://www.calclassic.com/.
FS2004 FEATURES:
AIRCRAFT
1. Virtual Cockpit modified by Jorge Buiatti.
Include: Primary Flight Display, Nav Flight Display, Pitot & Gps-Nav Swicht, panel with Gps and Autopilot Heading Window (gauges from Microsoft FS9 airplanes like Boeing 747-400, Baron 58 and Cessna 208). Also include DME, Automatic Pilot Stack, Ligths Swichts, Cowl Flaps Swicht, Vor2 (for make more easy to intercept the radials Vor when you are flying trhu the Sid´s & Star´s aeroports with IVAO for example);Radio, ATC, MAP and GPS Icons, even one Clock with Wind vector (-clicking the clock´s center you will see the direction´s wind but no the speed of it- this gauge from Tom Gibson´s California Classics DC6-B) and some extra gauges like Oil Pression and Oil Temperature from Tom Gibson´s California Classics DC6-B gauges too. The Engine Start swichts and Fuel Valves gauges are from Daisuke Yamamoto, Kubota Hiroaki, Luis da Costa Pereira & Fabio Bonoldi´s "Lockeheed WP-3D ·Hurricane Hunter".
I know that this is not the real Cockpit but now you can flight from the Virtual Cockpit without make changes to 2D Panel Cockpit. All gauges are included into the Gauge.Zip.
2. There are no opening doors on this model.
3. The working cowl flaps are opened by Ctrl-Shift-V, and closed by Ctrl-Shift-C (both in increments) or use the cowl flaps switch. Note: COWL FLAPS MUST BE CLOSED FOR ENGINE START, OR WHEN YOU WANT TO SELECT A SINGLE ENGINE! This is due to an unfortunate gauge interaction.
________________________________________________________
(((Modified by Jorge Buiatti: Into the Virtual Cockpit you can start each engine one by one: close all fuel´s valves to stop the engines and after open the fuel valve from engine 1 and click the engine start 1, repeat this secuence for all four engines.)))
________________________________________________________
4. The plane is complete with reflective textures.
5. The landing gear has working compression struts, and retracts as seen in vintage video.
6. The landing lights light the ground properly, and must be extended before use (press the L key, and then press Shift-W).
7. Contrails whenever you want them (press the I key)
8. FS2002/4 style nav, landing, and beacon lights (press the L key)
9. FS2002/4 style visual effects, including touchdown smoke10. Working NAV2 radio
This plane also features animated landing gear, flaps, ailerons, elevators, and rudder.
REALISTIC ENGINE START:
To start the engines realistically and individually, do this: into the Virtual Cockpit you can start each engine one by one, close all fuel´s valves to stop the engines and after open the fuel valve from engine 1 and click the engine start 1, repeat this secuence for all four engine. This start secuence modification was made by Jorge Buiatti (buiattijo1@yahoo.es).
Or you can do this (original autors metod):
COWL FLAPS CLOSED
1. Go to Options/Controls/Assignments and set the 4 starters to
Ctrl-1 through Ctrl-4 (or other keys of your choice).
2. Go to spot view (Shift-S)
3. Press E3 to select engine #3.
4. Tap the Ctrl-3 key just enough to keep the prop moving slowly.
5. Wait for 6 prop blades to pass by.
6. Quickly press M+++: engine 3 will start.
7. Press E4 to select engine #4.
8. Repeat steps 4-6 to start engine #4.
9. Repeat steps 3-6 to start engines #2 and #1.
10. Press E1234 to get control of both engines back.
11. Normal start sequence is 3-4-2-1.COWL FLAPS OPEN.
PANEL:
Panel is included, by Greg Pepper
SOUND:
Sounds assembled by Dave McQueen.
FLIGHT DYNAMICS, FUEL PLANNING, ETC.
Press F10 to bring up FSAviator's Reference file for details on power settings, etc.
Read the "Read before flitght.txt" file by FSAviator for details on how to fly this plane.
Unzip the file and move the BOAC 377 GC folder into the FS2004/ Aircraft folder.
Unzip the GAUGES zip file and copy the gauges files into the FS20004 GAUGES Folder.
********************************************************
Boeing 377 History:
When Boeing developed the B-29 Stratofortress during WW II, it was soon realized that it was the beginning of a new plateau of aircraft technology. The USAAF and Boeing soon realized that an impressive transport aircraft could be developed from the bomber, and the Model 367 (C-97) was flying by the end of the war. The B-29's wings, engines, and tail were mated with a completely new fuselage, whose dimensions at that time looked fantastic. The front looked bluff and unstreamlined, but the maximum speed was calculated to be as high as the bomber's. The plane was tailored to the military's needs, but as the war was winding down, the aircraft manufacturer began to think of ways this new technology could be translated into an airliner derivative.
Pan American was very interested in the plane, but thought that it would be even better equipped with the new Wasp Major engine, then in development for the B-29's successor, the B-50. With the promise of an order from Pan Am, Boeing had refined the Model 377 with the new engines by 1946, with all the latest refinements, including full anti-icing, light alloy structure, and foldable tail. The interior would feature a two-deck arrangement, with luxurious furnishings and a spiral staircase to a downstairs bar/lounge.
In June 1946 Pan American cancelled it's DC-7 order (an earlier model quite different from the eventual DC-7) and ordered 20 377's, now named the Stratocruiser. Further orders came from Northwest, American Overseas, SAS, BOAC, and United. The Northwest and United examples were built slightly differently, the most obvious change being the square passenger windows. However, total production of the Stratocruiser only came to 56, with most airlines shying away from the complex Wasp Major engines with their twin General Electric turbos and Hamilton Standard hollow-steel square-tipped props. There were indeed many problems with the "Strat" as it was placed into service, but the competing Connies and DC-6's also had problems that even lead to their temporary grounding. SAS never actually took delivery, their four planes being added to the BOAC order.
The Stratocruiser was typically used in first class transatlantic service (except for the United and Northwest planes), and other international routes. However, they were rapidly replaced by other more economical aircraft in the late 50's and by jets in the early 60's, and were sold to other operators. Many of these were converted to cargo operations, and several were used in the "Guppy" rebuildings, resulting in grossly outsized fuselages for hauling such things as rocket sections and airplane parts. Others became transports for the Israeli air force.
NOTE: Variations of This plane and/or many other classic airliners can be
downloaded free from Tom Gibson's Classic Airliner WEB site at -
http://www.calclassic.com/
**************************************************************************
Now the legal stuff:
COPYRIGHT 2003 BY TOM GIBSON, GREG PEPPER, DAVE MCQUEEN, ALL RIGHTS RESERVED
REPAINTS: REPAINTS ARE ALLOWED WITHOUT FURTHER PERMISSION, BUT WE PREFER THAT THEY ONLY BE UPLOADED TO TOTALLY FREE SITES - I.E. NO CHARGES OR SUBSCRIPTION FEES FOR INCREASED ACCESS. HOWEVER, IF YOU REPAINT THE PLANE YOU MUST CREDIT ALL OF THE ORIGINAL AUTHORS IN YOUR TEXT FILE AND INCLUDE THIS TEXT FILE.
THIS AIRPLANE IS THE PROPERTY OF THE AUTHOR, AND CANNOT BE RE-SOLD OR PACKAGED WITH ANY PRODUCT FOR SALE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF THE AUTHORS. THIS INCLUDES "FREE" CD COMPILATIONS WITH A CHARGE OF ANY KIND. THIS IS FREEWARE!!
YOU MAY NOT UPLOAD THIS PLANE TO ANY OTHER SERVER, IT MUST REMAIN ON THE ORIGINAL SERVER.
THIS FILE ARCHIVE OR ANY REPAINTS MUST NOT BE UPLOADED TO A SITE OR LOCATION THAT CLAIMS ANY SORT OF COPYRIGHT ON THE FILE; COPYRIGHT REMAINS WITH THE ORIGINAL AUTHOR. UPLOADING OF THIS FILE TO SUCH A SITE DOES NOT CONSTITUTE PERMISSION OF THE AUTHORS TO VIOLATE THESE TERMS BY THAT SITE.
THIS FILE ARCHIVE MUST REMAIN INTACT; YOU MAY NOT REMOVE OR UPLOAD PARTS OF THIS ARCHIVE. THIS ENTIRE TEXT FILE MUST BE INCLUDED IN ANY DISTRIBUTION.
THE AUTHORS ARE NOT LIABLE FOR ANY DAMAGE THAT YOU MIGHT INCUR AS A RESULT OF USING THESE PRODUCTS. YOU ASSUME THE RISK OF USE.*************************************************************
About Virtual Cockpit modifications:
First of all sorry by my poor inglish´s level.This is my second Virtual Cockpit modification´s intent of this "Heavy Old Bird", I use FS2004 from some years ago and this airplane was my first free addon. I love this model because it´s so nice to fly and if you use one force Joystick it feel so heavy for turn, climb, take off and land (try it with full load!!!).
For make this modifications I add some gauges from differents models and change some coordenates sizes into the Virtual Cockpit "panel.config", very hard work for somebody like me that don´t have a great feeling with the PC´s simulators secrets.... A lot of thanks to Greg Pepper, Dave McQueen and Tom Gibson for make this beautifull airplane and also to the gauges creator´s for make the simulation world much more real.
Remember: "One good landing is when you can go out from the airplane walking, but, the perfect landing is when the airplane can fly again"!!! Jorge Buiatti.
buiattijo1@yahoo.es
